Projector Panasonic PT-DS12K

Projector Model

Panasonic PT-DS12K

Panel Size

24.1 mm (0.95 in) diagonal (4:3 aspect ratio)

Display method

DLP™ chip x 3, DLP™ projection system

Pixels

1,470,000 (1,400 x 1,050) x 3, total of 4,410,000 pixels

Lamp

380 W UHM lamps (HIGH mode) x 2

Brightness

12,000 lm*3 (dual-lamp)

Contrast ratio

10,000:1 (full on/off, with DYNAMIC IRIS set to “3”)

Screen size (diagonal)

1.78 –25.4 m (70–1,000 in), 1.78 –15.24 m (70–600 in) with the ET-D75LE8, 4:3 aspect ratio

Center-to-corner uniformity

90 %

Resolution

SXGA (1,400 x 1,050) pixels (Input signals that exceed this resolution will
be converted to 1,400 x 1,050 pixels.)

Optical axis shift

Vertical: ±50 % (±40 % with the ET-D75LE6) from center
of screen (powered)

Horizontal: ±30 % (±20 % with the ET-D75LE6) from center of screen (powered)

 T

E

R

M

I

N

A

L

SDI 1 IN

BNC x 1 (3G/HD/SD-SDI)

SDI 2 IN

BNC x 1 (HD/SD-SDI)

3D SYNC IN/OUT

BNC x 1 (3D timing signal)

3D SYNC OUT

BNC x 1 (3D timing signal)

DVI-D IN

DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with
HDCP, compatible with single link only)

HDMI IN

HDMI 19-pin x 1 (Deep Color, compatible with HDCP)

RGB 1 IN

BNC x 5 (RGB/YPBPR/YCBCR/YC x 1)

RGB 2 IN

D-Sub HD 15-pin (female) x 1 (RGB/YPBPR/YCBCR x 1)

VIDEO IN

BNC x 1 (composite video)

SERIAL IN

D-sub 9-pin (female) x 1 for external control (RS-232C compliant)

SERIAL OUT

D-sub 9-pin (male) x 1 for link control

REMOTE 1 IN

M3 x 1 for wired remote control

REMOTE 1 OUT

M3 x 1 for link control (for wired remote control)

REMOTE 2 IN

D-sub 9-pin (female) x 1 for external control (parallel)

LAN

RJ-45 x 1 (for network connection, 10Base-T/100Base-TX, compliant with PJLink™)

Keystone correction range

Vertical: ±40°*6, horizontal: ±15°

Keystone correction range with

optional Upgrade Kit ET-UK20

Vertical ±40° and horizontal ±40° with the
ET-D75LE1/LE2/LE10/LE20,

vertical ±45° and horizontal ±40° with the ET-D75LE3/LE4/LE30/LE40,

vertical ±22° and horizontal ±15° with the ET-D75LE5/LE50,

vertical ±28° and horizontal ±15° with the ET-D75LE6

Installation

Ceiling/floor, front /rear, portrait

Power supply

120 V, 220-240 V AC, 50/60 Hz

Power consumption

120 V AC

980 W (1,010 VA)

(0.2 W with standby mode set to eco. 6 W with standby mode set to normal. Both with fan stopped.)

220-240 V AC

950 W (980 VA)

(0.3 W with standby mode set to eco.

9 W with standby mode set to normal. Both with fan stopped.)

Dimensions (W x H x D)

530 x 200*8 x 548.5 mm (20-7/8 x 7-7/8*8 x 21-19/32 in) (optional lens not included)

Weight

Approximately 24 kg (52.9 lbs) (optional lens not included)